TESERY OEM BLE Bluetooth Tire Pressure Monitoring Sensor (TPMS) for Model 3/Y/S/X
TESERY OEM BLE Bluetooth Tire Pressure Monitoring Sensor (TPMS) for Model 3/Y/S/X
Tesla TPMS丨Stay Ahead with Precision, Convenience, and Safety
As your Tesla crosses the 4 to 5 year ownership mark, factory TPMS batteries typically reach end-of-life. Drifting readings or sudden warning lights can disrupt daily commutes and long trips. The TESERY BLE Bluetooth TPMS is a direct, cost-effective replacement for aging OEM sensors, delivering accurate, real-time tire health data to your smartphone without dealership visits.
Why Upgrade to TESERY BLE TPMS
Real-Time Monitoring
Track pressure and temperature via a lightweight BLE app. No OBD dongles or coding required.
Stable Connection
BLE 5.0 protocol ensures consistent, low-latency transmission even at highway speeds.
Pre-Programmed
Factory-calibrated for Tesla. Auto-pairs on first drive with zero manual setup.
Long Battery Life
Sealed high-capacity cell matches or exceeds OEM longevity. Replace once, drive for years.
Plug-and-Play
Direct valve-stem swap. Standard wrench included. Complete installation in under 10 mins.
OEM-Level Accuracy
Tested to ±1.5 PSI. Meets SAE and DOT TPMS standards for daily reliability.
DIY Installation in 6 Steps
Loosen Wheel
Park on flat ground. Engage brake. Loosen lug nuts slightly before lifting.
Deflate & Remove
Press valve pin to release air. Unscrew existing cap and stem assembly.
Install Sensor
Hand-tighten TESERY sensor onto valve stem. Ensure rubber gasket seats flush.
Inflate to Spec
Fill to Tesla's recommended PSI. Check for leaks with soapy water.
Secure & Verify
The sensor replaces the valve cap. Ensure snug fit. No extra cap is needed.
Drive & Pair
Drive 15+ mph for 5 mins. Open BLE app to auto-register and view live data.
Technical Specifications
Compatibility Guide
Tesla switched from RF to BLE TPMS in late 2020. Match your VIN date below.
| TPMS Protocol | Compatible Tesla Models |
|---|---|
|
Bluetooth (BLE) (Part: 1490701-01-B) |
Model 3 (Oct 2020 - Present) Model Y (All trims, since Oct 2020) Model X / Plaid (Refresh, Oct 2021+) Model S / Plaid (Refresh, Jun 2021+) |
|
RF 433MHz (Part: 1034602-00-A/C) |
Model 3 (2017 - Sept 2020) Model S (2012 - Jan 2021) Model X (2015 - Jan 2021) |
Frequently Asked Questions
What is TPMS (Tire Pressure Monitoring System)?
What causes TPMS sensors to fail?
How does BLE TPMS connect to my smartphone?
① BLE Sensors Transmit Data: The BLE TPMS sensors inside your tires continuously monitor tire pressure and temperature. They wirelessly send this data using Bluetooth Low Energy (BLE) signals.
② Smartphone Receives and Processes Data: Your smartphone, with Bluetooth enabled, receives the data. You'll need a compatible TPMS app to process and display the information.
③ Real-Time Information Displayed: The app will show real-time tire pressure and temperature readings for each tire, with color-coded warnings for low pressure, helping you take action before any issues arise.
What does it mean when my TPMS indicator illuminates?
① Solid TPMS Light: If the TPMS light stays on, it indicates that at least one of your tires has low pressure.
② Flashing TPMS Light: If the light flashes for 60 to 90 seconds when you start your car and then stays on, this means there's a malfunction in your TPMS system. You should take your vehicle to a service center for an inspection.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Total de artículos
Subtotal de productos